Review: The Nespresso of Joints?
What's the BEED Machine?
The BEED machine is like a fancy box that fills special cones with ground cannabis. It’s really easy to use – just plug it in, put in your cone and a pod, and voilà – your joint is ready to enjoy. They call it the “Nespresso of joints,” and that’s a pretty good comparison. It’s simple to operate, even though it can be a bit noisy.
The machine looks really cool – it’s designed nicely and would fit well on any kitchen counter. It doesn’t have any wild patterns or big weed symbols on it. It’s got smooth edges and different sections, so no one would even guess that it’s for filling joints unless you tell them.
There’s only one button, and it doesn’t turn the machine on or off. As soon as you plug in the BEED, it starts making a loud grinding sound. That noise is the signal that the machine is getting ready to fill the cones. It looks slick and works well, but it’s definitely not quiet.
What's Inside the BEED?
The BEED machine works with pre-ground flower to fill the cones, similar to how a Nespresso machine uses special capsules for coffee grounds. If you’re in California, you can buy these flower capsules from BEED, which contain THC-rich cannabis. For those of us outside California, you can still enjoy the BEED by using capsules filled with high-quality CBD flower. Plus, you can also get empty pods that you can fill with your own choice of cannabis flower.
CBD flower can be a bit unpredictable in terms of quality – there aren’t many checks from when the seed is planted to when it’s sold. However, BEED uses really good CBD in their capsules, so you can have a tasty and aromatic joint without the high. And if you choose the empty pods, you can create your own unique blend. Whether you want a joint from a single type of cannabis or a custom blend, the choice is yours. You can even mix together whatever remains of your stash for a personalized experience.
How the BEED Machine Operates
To start using the BEED machine, simply plug it in, and it will turn on automatically. There’s only one button on the machine. Press it once, and the top compartment will open up. Drop the cone in first, followed by the capsule. Press the button again to close the compartment, and the machine will start doing its thing.
Once the BEED finishes filling the cone, the top compartment will briefly slide open to remove the empty capsule. Then, the front compartment will open, revealing your nicely packed cone. Underneath the machine, there’s a drawer where you can dispose of the empty capsules.
The BEED does a good job of filling the cones just right – the flower is placed in without being overly tightly packed, allowing for proper airflow. This means the joints light up and smoke well. Unlike some pre-rolled joints from dispensaries that can be too tightly packed, the BEED machine creates joints that draw smoothly and burn nicely.
One important tip: Make sure you place the cone and the capsule precisely in position. If they’re not centered correctly, the filling process might not go smoothly, leading to a half-filled cone and a bit of a mess.
Is the BEED Machine Worth the Investment?
Let’s be clear – $359 might seem steep, especially if you’re used to rolling your own joints. Because of this, the BEED machine might not be the perfect fit for everyone.
However, if you’re a fan of unique cannabis gadgets, enjoy adding a tech touch to your weed setup, or simply crave the ultimate convenience of having joints at your fingertips with a simple button press, then this machine could be your thing. It wouldn’t seem out of place at a classy event or sitting alongside a Keurig in a cannabis-friendly setting. The BEED could also make a thoughtful birthday present for someone new to cannabis or a gadget enthusiast.
Pros of the BEED Machine:
Cons of the BEED Machine:
Comparing BEED to Other Cone Fillers
The BEED machine focuses more on filling cones than rolling joints. How does it compare to other cone fillers out there?
Many cone fillers are designed for commercial use, which gives them high production capacity but makes them less suitable for daily consumers. The cone fillers meant for home use are often manual and made from inexpensive plastics. The BEED stands out with its display-worthy design and user-friendly experience.
Horns Bee Portable Herb Grinder – Cone Rolling Machine:
Fast Fill 55 – Cone Filling Machine
In summary, the BEED machine offers an elegant design and automatic filling, distinguishing it from other options that may have different features and price points.
BEED Shipping and Care Information
The BEED machine, along with empty and CBD capsules, can be shipped to all 50 states. However, THC capsules are currently limited to California consumers.
Caring for Your BEED Machine
To ensure your BEED machine stays in good condition, store it in a cool, dry place away from water. While the filling process helps keep the machine clean, there might be occasional spills in the bottom drawer. Use a clean, dry cloth to wipe the BEED; avoid using water or cleaning sprays.
Final Thoughts on the BEED
Although the BEED machine comes at a higher cost, its quality construction and design deliver excellent joint-filling at the press of a button. It’s quick, mess-free, and its sleek appearance suits both kitchen counters and stash closets. Whether you’re looking to treat yourself or surprise a well-equipped cannabis enthusiast, the BEED machine is a solid choice